Product Description
The Bestway® Pool Heater is a simple and effective way to warm up water in your above ground pool, creating a comfortable and relaxing environment to swim, paddle or play in.Â
The outdoor pool heater is perfect for use with Bestway® pools and is compatible with sand and filter pumps 1000 gallons and below.
The electric pool heater has two hose outlets, one of which connects it to a filter pump and the other to your above ground pool. Clean water is pumped into the above ground pool heater via the filter pump, where it’s then heated and pumped back into the pool.
The swimming pool heater, which has a 4m power cord to plug it into to an electrical outlet, comes with all the necessary hoses and attachments, ensuring a swift and simple set up.
Depending on your pool size and your preferred temperature the pool heater can take anywhere between 12 hours to 3 days to warm the water; the heater has the ability to increase water temperature by approximately 0.5°C to 1.5°C per hour.
Product Features:
- Soft touch digital control panel and water flow sensor for high level protection.
- 4m power cord and all necessary hoses and attachments included.
- Compatible with above ground pools with water capacities between 1,520-17,035L (400-4,500gal) up to 15ft or smaller.
- Pool heater is supplied with a portable residual current device with RCD not exceeding 10mA.Â
- Compatible with filter pumps and sand pumps with flow rates up to 3,785 L (1,000gal). Please note pump is required for pool heater to work effectively; heater connects to the pool filter via 32mm hose connection.
Product Dimensions:
- Height: 29cm
- Width: 48cm
- Weight: 5.3kg.
Product Setup:
The heater is set up in the following order:
- Connect hose from ‘A’ to the pool heater
- Make sure the arrow on the heater is facing the filter pump
- The hose will connect from the heater into the filter pump
- Connect hose from filter pump into ‘B’.